New Arrival Arabic Evening Dresses for Teenagers - Custom Made
فساتين السهرة للبنات جديد 2026 translates roughly to "evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are evening dresses. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Teen sizing sits between children's and women's blocks, and it has to pass a trim-safety review as well as a fit review. New arrivals need a sample in the buyer's hand before the season, so the sampling slot is booked before the fabric is confirmed.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt lined |
| Closure | covered button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
