Tulle Arabic Evening Dresses in Beige - Wholesale

فساتين سهرة تل بيج translates roughly to "tulle evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production these are tulle evening dresses, cut in beige. Tulle volume comes from layers, not from weight. Every tulle edge that touches skin needs a soft binding, or the dress is unwearable after an hour. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Beige is forgiving on the body and unforgiving on the seam - a shadow through the seam allowance shows more on beige than on black.

What Has To Be Specified

• Shell: Tulle, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: Beige, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Tulle volume comes from layers, not from weight. Every tulle edge that touches skin needs a soft binding, or the dress is unwearable after an hour.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Options We Can Build To

• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.