Kids and Teens Metallic Bronze African Mermaid Gown

Most requests we quote against “kids and teens metallic bronze african mermaid gown” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.

In practical terms this is a mermaid gown in metallic wax built for kids. Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron. A mermaid gown is fitted from bust to knee and flared below it. The flare only works if the knee line is right, and the knee line only works if the stretch of the shell is agreed first.

Kids' sizing has to pass a safety review as well as a fit review, which means trims, cords and small parts all need a documented pull test.

What Has To Be Specified

• Shell: metallic wax, weight and hand approved on a physical swatch, not on a screen.
• Block: mermaid gown, fitted on a real model at the middle size before grading.
• Colour: bronze, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
• Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
• Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
• Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
• Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Metallic wax carries a foil-like surface on a wax-print base. The metallic layer is the fragile part: it creases white at a hard fold and it cannot be pressed directly with a hot iron.

A mermaid gown is fitted from bust to knee and flared below it. The flare only works if the knee line is right, and the knee line only works if the stretch of the shell is agreed first.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.

Options We Can Build To

• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Lining: unlined, half-lined or fully lined — the last one changes the hand and the cost together.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
• Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.