Tall Ladies Royal Blue African Mermaid Gown
Most requests we quote against “tall ladies royal blue african mermaid gown” arrive with a photo, a target price and very little else. The photo is the easy part; the specification is where the money is saved or lost.
In practical terms this is a mermaid gown in ankara wax print built for women. Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron. A mermaid gown is fitted from bust to knee and flared below it. The flare only works if the knee line is right, and the knee line only works if the stretch of the shell is agreed first.
The size run is the first commercial decision: a four-size run sells a test order, a ten-size run sells a container.
What Has To Be Specified
- Shell: ankara wax print, weight and hand approved on a physical swatch, not on a screen.
- Block: mermaid gown, fitted on a real model at the middle size before grading.
- Colour: royal blue, with a lab dip approved against your own colour card and a light-box check (D65 and TL84).
- Lining: state unlined, half-lined or fully lined. This single line changes the hand, the packing and the cost.
- Closure: name the type and the position. “Back zip” is not a specification; “invisible zip, CB, 55 cm, self-fabric guard” is.
- Sizing: give the size run, the grade rule and the target fit model. A four-size test and a ten-size container run are two different projects.
- Trim and hardware: bead, cord, eyelet or feather, with a colour reference and a pull-strength requirement for anything on a children's style.
Suggested Starting Specification
| Shell fabric | ankara wax print - swatch-approved, single lot for bulk |
| Silhouette | mermaid gown |
| Detail | clean finish, no added trim |
| Colourway | royal blue |
| Lining | unlined with bound seams |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days including fabric booking |
| MOQ | 300 pcs per style for a custom print |
Where This Style Goes Wrong In Production
Ankara is a wax-printed cotton, normally 100-120 gsm. The hand is slightly crisp, so it holds a peplum, a pleat or a stand collar without much interlining, and it presses flat after a hot iron.
A mermaid gown is fitted from bust to knee and flared below it. The flare only works if the knee line is right, and the knee line only works if the stretch of the shell is agreed first.
Trims are quoted per piece and bought per roll. A 15% trim allowance sounds generous until the third size run lands.
Grading is where the money disappears. Every detail that is placed by eye on the sample has to be measured on the pattern, or the size run drifts.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Options We Can Build To
- Trim: embroidered, beaded or plain, with the density quoted per panel rather than per garment.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
- Closure: invisible zip, exposed zip, button placket or lace-up, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
