Welcome to Bafinasa official website!

Casual All Season Polyester Chiffon Tunic Top

Source:News / Time:2026-11-19

The first conversation about this style is usually about length. The second, if the buyer is serious, is about the inside: lining, interlining, and where the seams are pressed. Samples for this garment rarely fail on design. They fail on a measurement that was never written down, and a cloth that behaved differently from the swatch. Buyers arrive with a reference photo and a target price. The two numbers that decide whether that price is reachable are the cloth weight and how many seams run through the collar. Written down, the request is casual all season polyester chiffon tunic top: a body, a length and a budget. Those three lines are enough to start a pattern, provided somebody writes the fourth line - the finish.

Keep one dye lot for bulk. Splitting a thousand pieces across two lots is how a reorder ends up with a visible line between sizes. The hand a buyer approves on a swatch is what bulk has to repeat. If the mill cannot repeat it, change the mill before the pattern is graded. For chiffon, order five to eight percent extra. Cutting around a shade band costs more than the cloth. Wash the sample once before approval. Some cloths lose two centimetres of length and gain a surface that was not on the swatch.

Structure and seams

The pattern sets the shape and the sewing protects it. A few steps decide whether it survives the third wash. Set the placket before the collar. Two millimetres of shift at the button stand is visible. Cuffs are cut in pairs from the same panel. A mismatched pair is the first thing an inspector sees. Shell buttons change the perceived price more than they change the cost. Decide early, because button size changes the placket width.

The collar is where the eye lands first, so it is also where a two-millimetre error shows. Set it from the pattern, not from the sample. Check the collar after pressing, not before. Light cloth relaxes under steam and what looked balanced on the table can shift.

On this style the difference between a good and a poor fit is usually two centimetres at the placket, not a redesign. For Chiffon Dresses sold across regions, keep one measurement sheet per market; one market's Large is another market's Medium. Tolerances belong on the sheet: plus or minus one centimetre on the body, half a centimetre on the collar.

Specification, item by item

Shellchiffon, swatch-approved, one dye lot for bulk
Bodyblouse
Lengthconfirmed on the wearer, in her shoes
Colourwaybuyer colourway, lab-dipped under two lights
Liningno lining; faced yoke, cuffs and placket
Closureinvisible centre-back zip
Size runXS-2XL plus a curve block
Sample lead time10-14 days on stock cloth
MOQ150 pcs per style

Where this style fails in production

  • Buttons sized to the sample rather than to the placket, so bulk splits the button stand.
  • Collar fused too hard, giving a plastic edge that cannot be pressed into shape.
  • Placket cut on the bias by accident, so it twists after washing.
  • The sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is short. Fit on a real model before approving anything.
  • Every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

AQL 2.5 on major and 4.0 on minor is a reasonable default here. Write it into the order so the inspection has a rule. Trims are ordered against confirmed quantity plus three percent. Short trims stop a line faster than short cloth. Schedule an in-line check after the collar goes on. Catching a rotation there costs minutes; catching it at final costs the order.

Changes we can make at sample stage

  • Cuff: buttoned, elasticated, or turned back.
  • Placket: full, half, hidden, or none with a keyhole opening.
  • Back: plain, box pleat, or yoke with a loop.
  • Collar: classic point, camp, band, or removable.
  • Private label: woven label, care label and hangtag to your artwork.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own sheet.

Sampling runs in three steps: a proto to check proportion, a fit sample to check the body, and a pre-production sample cut from bulk cloth. The proto is usually made in stock cloth. Do not judge the hand from it; judge the line. The fit sample is where the pattern is corrected. Changes after this point cost time, not only money.

Send the tech pack as a PDF with a measurement table, not as a photo with notes in a chat. Photos carry intent, tables carry production. Confirm the ship window against the mill calendar and the holiday shutdown before the purchase order is signed.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top