Georgette Panel Halter Gown - Midweight Jersey Column Dress for OEM

A gown in midweight jersey, 97% viscose with 3% elastane, with georgette panelling, a halter neck with a tie closure, unlined, made in Colombia and machine washable at warm. Two things are worth being straight about. The georgette panelling is the first: georgette is a sheer, floaty cloth and jersey is a solid knit, so putting them together gives the gown contrast and movement, and it also means two cloths with different stretch and weight in one garment, which has to be engineered rather than just sewn. The halter is the second, because at 58 in this is a floor-length gown hanging entirely from the back of the neck, and 3% elastane is not enough to share that load. The reference is the Malek Dress by SILVIA TCHERASSI in cobalt geometry at 1,590 dollars. Dongguan Bafinasa Garments Co., Ltd. develops comparable jersey gowns on OEM and ODM terms, from fabric and georgette sourcing through halter engineering to retail or FBA ready packing. We publish this as a development reference and build your own version of it, and we do not supply the branded original or reproduce anyone else's label.

Key Features

• Georgette panelling, which gives a jersey gown contrast and movement
• Halter neck with a tie closure, so the neckline can be set by the wearer
• Midweight jersey, which hangs rather than clings
• Gown length at 58 in for size S
• 97% viscose with 3% elastane, drape with a little give
• Unlined, so the georgette panels can move
• Machine wash warm as stated, unusual for a gown and worth testing
• Made in Colombia as stated
• Filed by the retailer under both gowns and halter dresses

Customisable Options

• Fabric: viscose elastane jersey as the reference, recycled viscose, a higher elastane percentage, and the weight
• Panelling: georgette as the reference, the placement, how much, or a different contrast cloth
• Halter: tie closure as the reference, a fixed halter, or a lower or higher front
• Back: as the reference, and how low it goes
• Length from midi to floor, hem finish and whether there is a train
• A slip or lining option, given the georgette panels are sheer
• Size set, colour development, private label and care labelling

Specifications

Size Chart

The reference publishes one row, size S at bust 30 in, waist 29 in, hips 36 in and length 58 in, and we would not build your chart from it. A 30 in bust with a 29 in waist on a 182 cm model is not a body measurement, and the most likely reading is a close-fitting jersey measured flat. The length, 58 in, is the usable figure and it is a true floor length, so the customer's height decides whether it works more than any circumference does. Our grade below is a proposal, and with a halter tie there is real fitting tolerance at the neck, which is worth using.

Occasions and Styling

Suits formal evenings, black tie, galas and destination weddings. The georgette panels are the movement, so nothing else competes.

Production and Quality Control

There are no customer reviews on this listing, so there is no score to quote and no complaint pattern to read. We plan from construction, and a floor-length halter gown in jersey with georgette panels has three serious risks.

The halter is the first. At 58 in, the whole weight of the gown hangs from the back of the neck, and at 3% elastane the jersey has very little give to share that load, so the strain goes into the neckline attachment and into the wearer's neck. That has two consequences: it will stretch or fail at the attachment if it is not engineered, and it will be uncomfortable over a long evening even if it holds. We reinforce the attachment and distribute the load rather than topstitching a strap on, test it on the body and under movement, and test it after washing, since a wet jersey gown is at its heaviest and weakest at the same moment.

Two cloths with different stretch is the second. Jersey stretches and georgette does not, and they have different weights, so a seam between them will pucker and pull unless the difference is accounted for in the pattern and in the sewing. Georgette is also sheer and very light, so it will float away from the jersey rather than sit against it if it is not handled properly, which is either the effect you want or a fault, depending on whether it was planned. We test stretch on both cloths, match their behaviour before production, specify the seam between them rather than leaving it to the line, and decide with you what the panel is meant to do before we cut it.

Viscose with 3% elastane is the third. Viscose is weak when wet and will shrink, and a floor-length unlined gown will grow with wear if the cloth is not stable, which shows at the hem first and worst. The elastane helps recovery but 3% is a small amount doing a lot of work. We relax and pre-shrink before cutting, control shrinkage by test, test recovery and pilling, and check the garment after the care cycle rather than only off the machine. The machine wash warm instruction is unusual for a gown like this and we would test it rather than copy it, since a warm wash on a viscose gown that has not been pre-shrunk properly is a reliable way to lose length. Because the gown is unlined and has sheer panels, opacity is checked in the colourway you run. Every bulk shipment gets a measurement report against your approved chart.

Optional upgrades include recycled or FSC certified viscose with documentation, a defined weight and composition with testing reports, custom panel placements, alternative contrast cloths, a higher elastane percentage, reinforced halter options, alternative lengths, a slip, extended sizing, colour development and private label, hangtag and care labelling.

Pre-production sample approval, in-line inspection during cutting and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

Send us your tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.