Transitional Faux Leather Sleeveless Blazer

Buyers searching “transitional faux leather sleeveless blazer” are usually sourcing for the Gulf market, where an blazer is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production this is a sleeveless blazer. A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.

What Has To Be Specified

• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Detail: Sleeveless. Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.
• Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Detail alternatives on the Sleeveless: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.