Spring Leather Split Sleeve Blazer

Buyers searching “spring leather split sleeve blazer” are usually sourcing for the Gulf market, where an blazer is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production this is a long sleeves blazer. A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.

What Has To Be Specified

• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Detail: Long Sleeves. Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.
• Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Options We Can Build To

• Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
• Detail alternatives on the Long Sleeves: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.