Welcome to Bafinasa official website!
Your Location: Home - News - Silk Blazer Lining

Silk Blazer Lining

Source:News / Time:2026-11-07

“silk blazer lining” translates roughly to "silk blazer". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a silk blazer. Silk gives the drape and the sheen, and it brings the QC problems with it: it water-spots, it slips under the needle, and it needs a cool press. A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

What Has To Be Specified

  • Shell: Silk, hand and weight approved on a physical swatch - imported cloth rarely matches a screen.
  • Block: Sheath bodice, fitted on a real model at the middle size before grading.
  • Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabricSilk - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteSheath
Bodicesoft bodice, light boning
Colourwaybuyer's colourway, lab-dipped
Liningbodice lined, skirt lined
Closurecovered button placket
Size runXS-2XL plus a curve block
Sample lead time15-20 days for beaded panels
MOQ300 pcs per style for custom beading

Where This Style Goes Wrong In Production

Silk gives the drape and the sheen, and it brings the QC problems with it: it water-spots, it slips under the needle, and it needs a cool press.

A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Options We Can Build To

  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
  • Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top