Welcome to Bafinasa official website!

White Jacquard Fitted Blazer

Source:News / Time:2026-11-07

The search phrase “white jacquard fitted blazer” is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.

In production this is a jacquard blazer, cut in white. Jacquard hides a light crease and shows a bad grain line. Cut every panel the same direction and check the motif on the centre front before the marker is frozen. A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

White blazers sit close to bridal, so specify the exact white (optical, ivory, cream) and warn the buyer about optical brighteners.

What Has To Be Specified

  • Shell: Jacquard, hand and weight approved on a physical swatch - imported cloth rarely matches a screen.
  • Block: Sheath bodice, fitted on a real model at the middle size before grading.
  • Colour: White, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabricJacquard - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteSheath
Bodicesoft bodice, light boning
ColourwayWhite
Liningfully lined, bagged hem
Closurecorset lace-up back
Size runS-3XL graded to your sheet
Sample lead time15-20 days for beaded panels
MOQ150 pcs per style

Where This Style Goes Wrong In Production

Jacquard hides a light crease and shows a bad grain line. Cut every panel the same direction and check the motif on the centre front before the marker is frozen.

A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Options We Can Build To

  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
  • Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
  • Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top