Women Over 50 Sleeveless Blazer with Gold Buttons
When a request arrives with “women over 50 sleeveless blazer with gold buttons” in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a sleeveless blazer, cut in gold. A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut. Gold is a family of tones, not one colour. Fix the tone on a physical bead card and keep one reference per order.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Detail: Sleeveless. Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.
- Colour: Gold, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | Sleeveless |
| Colourway | Gold |
| Lining | fully lined, bagged hem |
| Closure | invisible centre-back zip |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath blazer is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Detail alternatives on the Sleeveless: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
