Wholesale White Backless Club Dress

The search phrase “wholesale white backless club dress” is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.

In production this is a backless dress, cut in white. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

White backless dresses sit close to bridal, so specify the exact white (optical, ivory, cream) and warn the buyer about optical brighteners.

What Has To Be Specified

• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: White, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Options We Can Build To

• Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.