Welcome to Bafinasa official website!

Summer White Backless Mermaid Dress

Source:News / Time:2026-11-04

Buyers searching “summer white backless mermaid dress” are usually sourcing for the Gulf market, where an backless dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production this is a backless dress, cut in white. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

White backless dresses sit close to bridal, so specify the exact white (optical, ivory, cream) and warn the buyer about optical brighteners.

What Has To Be Specified

  • Block: Mermaid bodice, fitted on a real model at the middle size before grading.
  • Colour: White, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabriccrepe - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteMermaid
Bodicesoft bodice, light boning
ColourwayWhite
Liningbodice lined, skirt unlined
Closureinvisible centre-back zip
Size runS-XL (4 sizes) for the test
Sample lead time15-20 days for beaded panels
MOQ150 pcs per style

Where This Style Goes Wrong In Production

A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

  • Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
  • Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top