Gold Backless Summer Dress Women's
When a request arrives with “gold backless summer dress women's” in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a backless dress, cut in gold. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Gold is a family of tones, not one colour. Fix the tone on a physical bead card and keep one reference per order.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Gold, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Gold |
| Lining | bodice lined, skirt lined |
| Closure | corset lace-up back |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
