Best for Women Emerald Green Backless Bikini

“best for women emerald green backless bikini” translates roughly to "best backless dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a backless dress, cut in emerald. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Emerald and deep green are the colours most likely to shift under LED lighting, so approve the dip under the light the customer will actually stand in.

What Has To Be Specified

• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: Emerald, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.