Gold Backless Midi Dress Women's
“gold backless midi dress women's” translates roughly to "midi backless dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production this is a midi backless dress, cut in gold. A midi backless dress finishes between the knee and the ankle, and it is the length that travels best: it works for a banquet, an engagement party and a wedding guest slot without a second order. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Gold is a family of tones, not one colour. Fix the tone on a physical bead card and keep one reference per order.
What Has To Be Specified
- Length: Midi, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Gold, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | Midi |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Gold |
| Lining | bodice lined, skirt lined |
| Closure | invisible centre-back zip |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
