Red Cross Back Straps Backless Push Up Bra
Buyers searching “red cross back straps backless push up bra” are usually sourcing for the Gulf market, where an backless dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.
In production this is a backless dress, cut in red. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Red is the highest-risk dye in the range: it crocks, it bleeds in cleaning, and it varies by lot. Fix the dip and stick to one dyehouse.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Red, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Red |
| Lining | bodice lined, skirt lined |
| Closure | invisible centre-back zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Options We Can Build To
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.