Cross Back Straps Gold Backless Two Piece Set
Buyers searching “cross back straps gold backless two piece set” are usually sourcing for the Gulf market, where an backless dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.
In production this is a backless dress, cut in gold. A two-piece set is bought as one look and worn as separates, so both pieces have to work alone - and the beading has to match across the join.
Gold is a family of tones, not one colour. Fix the tone on a physical bead card and keep one reference per order.
What Has To Be Specified
- Block: Two-Piece bodice, fitted on a real model at the middle size before grading.
- Colour: Gold, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Two-Piece |
| Bodice | soft bodice, light boning |
| Colourway | Gold |
| Lining | fully lined, bagged hem |
| Closure | concealed side zip |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A two-piece set is bought as one look and worn as separates, so both pieces have to work alone - and the beading has to match across the join.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.