Women's Black Cross Back Straps Backless Mermaid Dress

“women's black cross back straps backless mermaid dress” translates roughly to "backless dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a backless dress, cut in black. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

Black shows every loose thread and every dust mark on the fitting table, so the final inspection has to include a lint pass.

What Has To Be Specified

• Block: Mermaid bodice, fitted on a real model at the middle size before grading.
• Colour: Black, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Options We Can Build To

• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.