Cross Back Straps Red Backless Blouse
When a request arrives with “cross back straps red backless blouse” in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a backless dress, cut in red. A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Red is the highest-risk dye in the range: it crocks, it bleeds in cleaning, and it varies by lot. Fix the dip and stick to one dyehouse.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Red, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Red |
| Lining | bodice lined, skirt lined |
| Closure | covered button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath backless dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
