Long Sequin Soft Arabic Evening Dress Style with Satin Accents
موديل فستان سهرة طويلة ترتر ناعمة translates roughly to "style long sequin soft evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production this is a long sequin evening dress in the soft direction. A long evening dress runs to the ankle or the floor, which makes sweep and hem finish the design. A floor-length hem needs a horsehair or a weighted tape, or it will collapse in wear. Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Soft styling favours drape over structure - gathered bodices, fluid skirts and decoration that follows the body instead of standing away from it.
What Has To Be Specified
- Shell: Sequin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Length: Long, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Sequin - swatch-approved, one dye lot for bulk |
| Length | Long |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 150 pcs per style |
Where This Style Goes Wrong In Production
Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
