Satin Arabic Evening Dress with a Sleeveless Cut in Navy or Blue - Wholesale

Buyers searching فستان سهرة كت لون كحلي are usually sourcing for the Gulf market, where an evening dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production this is a satin sleeveless evening dress, cut in navy. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut. Navy is the workhorse of the category: it flatters, it photographs cleanly, and it hides a slightly uneven beading density better than black.

What Has To Be Specified

• Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Detail: Sleeveless. Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.
• Colour: Navy, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Options We Can Build To

• Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
• Detail alternatives on the Sleeveless: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.