Arabic Evening Dresses with a High Slit in Wine - Wholesale
When a request arrives with فساتين السهرة فتحة جانبية لون ماروني in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are high slit evening dresses, cut in wine. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
A high slit needs a faced placket and a bar-tack at the stop point. Without the tack, the slit splits past the stop within a season. Wine and maroon are the safest deep tones for a beaded bodice, because a bead that is a shade off does not read as a mistake.
What Has To Be Specified
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Detail: High Slit. A high slit needs a faced placket and a bar-tack at the stop point. Without the tack, the slit splits past the stop within a season.
- Colour: Wine, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | High Slit |
| Colourway | Wine |
| Lining | bodice lined, skirt unlined |
| Closure | covered button placket |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
A high slit needs a faced placket and a bar-tack at the stop point. Without the tack, the slit splits past the stop within a season.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Detail alternatives on the High Slit: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
