Long Royal Arabic Evening Dresses with Long Sleeves in Blue - Wholesale

فساتين السهرة أكمام طويلة لون ازرق نيلي translates roughly to "long royal evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production these are long long sleeves evening dresses in the royal direction, cut in blue. A long evening dress runs to the ankle or the floor, which makes sweep and hem finish the design. A floor-length hem needs a horsehair or a weighted tape, or it will collapse in wear. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull. A royal direction means the dress carries its decoration centrally - a jeweled bodice, a defined waist and a skirt with controlled volume, nothing asymmetric. Blue is the widest-selling colour family in this category; keep two dips - one cool, one deeper - and let the buyer choose per market.

What Has To Be Specified

• Length: Long, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
• Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
• Detail: Long Sleeves. Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.
• Colour: Blue, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Long sleeves mean the cuff, the sleeve length and the armhole all have to be agreed - and on a beaded fabric the sleeve seam has to be taped so it does not pull.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Options We Can Build To

• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Detail alternatives on the Long Sleeves: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.