Satin Royal Arabic Evening Dress with a Sleeveless Cut in Blue - Wholesale

فستان سهرة كت لون ازرق نيلي translates roughly to "satin royal evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a satin sleeveless evening dress in the royal direction, cut in blue. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut. A royal direction means the dress carries its decoration centrally - a jeweled bodice, a defined waist and a skirt with controlled volume, nothing asymmetric. Blue is the widest-selling colour family in this category; keep two dips - one cool, one deeper - and let the buyer choose per market.

What Has To Be Specified

• Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
• Detail: Sleeveless. Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.
• Colour: Blue, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.

A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Sleeveless means the armhole is the fit. Depth, curve and binding all have to be right before the first sample is cut.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Options We Can Build To

• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Detail alternatives on the Sleeveless: scaled up, reduced to a plain panel, or moved to the back for a cleaner front.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.