Welcome to Bafinasa official website!

Custom Tailored Turkish Arabic Evening Dresses - Wholesale

Source:News / Time:2026-10-31

Buyers searching فساتين سهرة تركية تفصيل حسب الطلب are usually sourcing for the Gulf market, where an evening dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production these are evening dresses in the turkish direction. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Turkish evening wear is a fitted bodice with a very full skirt, usually in tulle or taffeta, and it is the reference most often sent to us with a photo of a bridal salon window.

Custom tailoring means the measurement sheet is the product: ask for a made-to-measure sheet with at least eight points.

What Has To Be Specified

  • Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
  • Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabriccrepe - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteBall Gown
Bodicesoft bodice, light boning
Colourwaybuyer's colourway, lab-dipped
Liningfully lined, bagged hem
Closureinvisible centre-back zip
Size runS-XL (4 sizes) for the test
Sample lead time15-20 days for beaded panels
MOQ300 pcs per style for custom beading

Where This Style Goes Wrong In Production

A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Options We Can Build To

  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top