Midi Arabic Evening Dresses in Black - Custom Made
The Arabic search phrase فساتين سهرة ميدي لون اسود is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.
In production these are midi evening dresses, cut in black. A midi evening dress finishes between the knee and the ankle, and it is the length that travels best: it works for a banquet, an engagement party and a wedding guest slot without a second order. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Black shows every loose thread and every dust mark on the fitting table, so the final inspection has to include a lint pass.
What Has To Be Specified
- Length: Midi, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Black, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | Midi |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Black |
| Lining | bodice lined, skirt unlined |
| Closure | corset lace-up back |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
