Velvet Khaleeji Arabic Evening Dresses - Sample Order
When a request arrives with فساتين السهرة خليجية مخمل in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are velvet evening dresses in the khaleeji direction. Velvet has a nap. Mark every panel and never mix directions, or the dress photographs two-tone - and it can only be pressed on a velvet board. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Khaleeji styling means coverage plus drama - long sleeves or a cape, a heavily worked bodice, and a skirt with real sweep for a hall or a marquee.
What Has To Be Specified
- Shell: Velvet, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Velvet - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Ball Gown |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
Velvet has a nap. Mark every panel and never mix directions, or the dress photographs two-tone - and it can only be pressed on a velvet board.
A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.