Mermaid French-Style Arabic Evening Dresses - Wholesale
فساتين السهرة فرنسية سمكة translates roughly to "french-style evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are evening dresses in the french-style direction. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
The French reading of an evening dress is quiet: soft structure, a defined waist, and decoration that follows the seam rather than sitting on top of it.
What Has To Be Specified
- Block: Mermaid bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Mermaid |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | covered button placket |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 150 pcs per style |
Where This Style Goes Wrong In Production
A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
