Lace Turkish Arabic Evening Dresses - Wholesale

فساتين السهرة تركية دانتيل translates roughly to "lace turkish evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production these are lace evening dresses in the turkish direction. Lace is judged on the ground rather than the pattern: corded lace holds a bodice, soft French lace drapes, and the scalloped edge dictates where the hem can actually finish. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

Turkish evening wear is a fitted bodice with a very full skirt, usually in tulle or taffeta, and it is the reference most often sent to us with a photo of a bridal salon window.

What Has To Be Specified

• Shell: Lace, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
• Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Lace is judged on the ground rather than the pattern: corded lace holds a bodice, soft French lace drapes, and the scalloped edge dictates where the hem can actually finish.

A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.