Sequin Modern Arabic Evening Dresses - Wholesale
When a request arrives with فساتين سهرة مودرن ترتر in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are sequin evening dresses in the modern direction. Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The modern reading is architectural: fewer trims, sharper seaming, and a print or a texture doing the work that beading used to do.
What Has To Be Specified
- Shell: Sequin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Sequin - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | concealed side zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 150 pcs per style |
Where This Style Goes Wrong In Production
Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
