Mermaid Arabic Evening Dresses in Champagne - Wholesale
The Arabic search phrase فساتين السهرة سمكة شامبين is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.
In production these are evening dresses, cut in champagne. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Champagne is the most returned colour in evening wear, because every dye lot drifts slightly warmer or pinker. Approve the dip against the actual trim.
What Has To Be Specified
- Block: Mermaid bodice, fitted on a real model at the middle size before grading.
- Colour: Champagne, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Mermaid |
| Bodice | soft bodice, light boning |
| Colourway | Champagne |
| Lining | bodice lined, skirt unlined |
| Closure | covered button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
