Sequin Classic Arabic Evening Dresses - Wholesale

When a request arrives with فساتين السهرة كلاسيك ترتر in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.

In production these are sequin evening dresses in the classic direction. Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

A classic evening dress is the version a buyer repeats season after season - a clean neckline, a fitted bodice and a skirt that does not date.

What Has To Be Specified

• Shell: Sequin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.