Ball Gown Arabic Evening Dresses in Olive or Emerald - Custom Made
Buyers searching فساتين سهرة منفوشة اخضر زيتي are usually sourcing for the Gulf market, where an evening dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.
In production these are evening dresses, cut in olive. A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Olive photographs darker than it reads in the hand. Light it properly before you approve the beading colour.
What Has To Be Specified
- Block: Ball Gown bodice, fitted on a real model at the middle size before grading.
- Colour: Olive, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Ball Gown |
| Bodice | soft bodice, light boning |
| Colourway | Olive |
| Lining | bodice lined, skirt unlined |
| Closure | covered button placket |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
A ball gown carries a boned bodice and a skirt built from layers: tulle or organza over a crinoline, with the volume set by the number of layers rather than by the fabric weight.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
