Short Arabic Evening Dresses in Violet - Wholesale
When a request arrives with فساتين سهرة قصيرة بنفسجي in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are short evening dresses, cut in violet. A short evening dress finishes above the knee and lives or dies on the hem: a 2 cm difference changes the proportion at the leg completely, and that hem is photographed more than any other part of the garment. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Violet and purple are the tones most likely to look different on a phone screen than in a hall - send a physical swatch, not a photo.
What Has To Be Specified
- Length: Short, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Violet, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | Short |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Violet |
| Lining | bodice lined, skirt lined |
| Closure | covered button placket |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
