Midi Satin Arabic Evening Dress in Pink

فستان سهرة ميدي وردي translates roughly to "midi satin evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a midi satin evening dress, cut in pink. A midi evening dress finishes between the knee and the ankle, and it is the length that travels best: it works for a banquet, an engagement party and a wedding guest slot without a second order. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pink sells in the teen and young-ladies ranges but dates the fastest; keep it to a small colourway and re-shoot each season.

What Has To Be Specified

• Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Length: Midi, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: Pink, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Options We Can Build To

• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.