Welcome to Bafinasa official website!

Satin Arabic Evening Dresses in Sky Blue or Blue - Wholesale

Source:News / Time:2026-10-31

The Arabic search phrase فساتين السهرة ستان سماوي is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.

In production these are satin evening dresses, cut in sky blue. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Sky blue and baby blue read cool on camera and warm under tungsten, so the lab dip has to be checked in both lights before the bulk is dyed.

What Has To Be Specified

  • Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
  • Block: Sheath bodice, fitted on a real model at the middle size before grading.
  • Colour: Sky Blue, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabricSatin - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteSheath
Bodicesoft bodice, light boning
ColourwaySky Blue
Liningbodice lined, skirt lined
Closurecovered button placket
Size run34-48 with a Gulf grade
Sample lead time15-20 days for beaded panels
MOQ150 pcs per style

Where This Style Goes Wrong In Production

Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

  • Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
  • Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top