Midi Arabic Evening Dresses in Beige - Wholesale
When a request arrives with فساتين السهرة ميدي بيج in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are midi evening dresses, cut in beige. A midi evening dress finishes between the knee and the ankle, and it is the length that travels best: it works for a banquet, an engagement party and a wedding guest slot without a second order. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Beige is forgiving on the body and unforgiving on the seam - a shadow through the seam allowance shows more on beige than on black.
What Has To Be Specified
- Length: Midi, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Beige, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | Midi |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Beige |
| Lining | bodice lined, skirt unlined |
| Closure | corset lace-up back |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
