Satin Mermaid Arabic Evening Dress in Navy or Blue
When a request arrives with فستان سهرة سمكة كحلي in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a satin evening dress, cut in navy. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Navy is the workhorse of the category: it flatters, it photographs cleanly, and it hides a slightly uneven beading density better than black.
What Has To Be Specified
- Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Mermaid bodice, fitted on a real model at the middle size before grading.
- Colour: Navy, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Satin - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Mermaid |
| Bodice | soft bodice, light boning |
| Colourway | Navy |
| Lining | bodice lined, skirt lined |
| Closure | concealed side zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.
A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.