Chiffon Arabic Evening Dresses in Grey - Wholesale

The Arabic search phrase فساتين السهرة شيفون رمادي is the kind of query that lands in a factory inbox with a screenshot and a price, and nothing else. Unpacked, it names a length, a cloth and a finish - and those three decisions fix most of the cost before a single sample is cut.

In production these are chiffon evening dresses, cut in grey. Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Grey is the quiet option and the one that shows a bad lining colour fastest. Match the lining to the shell, not to the trim.

What Has To Be Specified

• Shell: Chiffon, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: Grey, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately.

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.