Satin Mermaid Arabic Evening Dress in Wine

فستان سهرة سمكة ماروني translates roughly to "satin evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production this is a satin evening dress, cut in wine. Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

Wine and maroon are the safest deep tones for a beaded bodice, because a bead that is a shade off does not read as a mistake.

What Has To Be Specified

• Shell: Satin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
• Block: Mermaid bodice, fitted on a real model at the middle size before grading.
• Colour: Wine, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

Satin shows every needle mark and every bubble at the seam. Use a fine needle, a soft press cloth, and hang the dress for 24 hours before the final measurement.

A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
• Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.