Sequin Arabic Evening Dresses in Gold - Wholesale
When a request arrives with فساتين سهرة ترتر ذهبي in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production these are sequin evening dresses, cut in gold. Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Gold is a family of tones, not one colour. Fix the tone on a physical bead card and keep one reference per order.
What Has To Be Specified
- Shell: Sequin, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Gold, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Sequin - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Gold |
| Lining | fully lined, bagged hem |
| Closure | covered button placket |
| Size run | S-3XL graded to your sheet |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
Sequin fabric is a mesh base with the sequin applied, so it has a direction and a nap. Every panel must be cut the same way, and every seam has to be taped or it will ladder.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
