Midi Arabic Evening Dresses in Champagne - Wholesale
فساتين السهرة ميدي شامبين translates roughly to "midi evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are midi evening dresses, cut in champagne. A midi evening dress finishes between the knee and the ankle, and it is the length that travels best: it works for a banquet, an engagement party and a wedding guest slot without a second order. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Champagne is the most returned colour in evening wear, because every dye lot drifts slightly warmer or pinker. Approve the dip against the actual trim.
What Has To Be Specified
- Length: Midi, with the finished length and the hem allowance stated in centimetres, measured on the wearer, not on the form.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Champagne, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | Midi |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Champagne |
| Lining | bodice lined, skirt lined |
| Closure | covered button placket |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 100 pcs per colour |
Where This Style Goes Wrong In Production
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
