Chiffon Arabic Evening Dress in Burgundy or Wine with Satin Accents
When a request arrives with فستان سهرة شيفون عنابي in it, the useful first question is not the price. It is which of these attributes the buyer actually intends to sell on.
In production this is a chiffon evening dress, cut in burgundy. Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Burgundy hides construction and shows lint. Plan a roller and a covered bag into the packing line.
What Has To Be Specified
- Shell: Chiffon, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Burgundy, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Chiffon - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Burgundy |
| Lining | fully lined, bagged hem |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 12-18 days after spec sign-off |
| MOQ | 150 pcs per style |
Where This Style Goes Wrong In Production
Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.