Welcome to Bafinasa official website!

Arabic Evening Dresses in Mauve or Violet

Source:News / Time:2026-10-31

Buyers searching فساتين السهرة باللون موف are usually sourcing for the Gulf market, where an evening dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.

In production these are evening dresses, cut in mauve. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Mauve drifts grey under cool light. Approve the dip in daylight and again under warm light.

What Has To Be Specified

  • Block: Sheath bodice, fitted on a real model at the middle size before grading.
  • Colour: Mauve, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
  • Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
  • Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
  • Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
  • Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
  • Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Shell fabriccrepe - swatch-approved, one dye lot for bulk
Lengthas per your spec sheet
SilhouetteSheath
Bodicesoft bodice, light boning
ColourwayMauve
Liningbodice lined, skirt lined
Closureinvisible centre-back zip
Size runS-3XL graded to your sheet
Sample lead time10-14 days on stock cloth
MOQ300 pcs per style for custom beading

Where This Style Goes Wrong In Production

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.

The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

  • Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
  • Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
  • Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
  • Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top