Chiffon Arabic Evening Dresses in Violet
فساتين سهرة شيفون بنفسجي translates roughly to "chiffon evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are chiffon evening dresses, cut in violet. Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Violet and purple are the tones most likely to look different on a phone screen than in a hall - send a physical swatch, not a photo.
What Has To Be Specified
- Shell: Chiffon, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Sheath bodice, fitted on a real model at the middle size before grading.
- Colour: Violet, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Chiffon - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Sheath |
| Bodice | soft bodice, light boning |
| Colourway | Violet |
| Lining | bodice lined, skirt unlined |
| Closure | covered button placket |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 50 pcs sample order |
Where This Style Goes Wrong In Production
Chiffon needs a French seam or an overlocked edge, plus a fusible strip on every seam that takes strain. It also needs a lining that is cut separately.
A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Packing: flat-fold with tissue, hanger-ready, or individual sealed bag for glitter and bead styles.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.
