Collection of Sheath Arabic Evening Dresses in Olive or Emerald

تشكيلة فساتين سهرة مقاسات كبيرة اخضر زيتي صك translates roughly to "collection evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.

In production these are evening dresses, cut in olive. A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Olive photographs darker than it reads in the hand. Light it properly before you approve the beading colour.

Plus sizing is a redraw, not a scale-up: the bust dart, the armhole and the waist drop all move, and the bodice has to be fitted on a real body.

What Has To Be Specified

• Block: Sheath bodice, fitted on a real model at the middle size before grading.
• Colour: Olive, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
• Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
• Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
• Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
• Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
• Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.

Suggested Starting Specification

Where This Style Goes Wrong In Production

A sheath evening dress is straight and close, with a walking vent at the back and a lining that has to be cut a few millimetres shorter than the shell so it does not hang below the hem.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.

Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.

Options We Can Build To

• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
• Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
• Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.

Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.

If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.