Collection of Mermaid Arabic Evening Dresses
Buyers searching تشكيلة فساتين سهرة للنحيفات عنابي سمكة are usually sourcing for the Gulf market, where an evening dress is judged in a hall, at a distance, under chandelier light. That changes what the money should be spent on.
In production these are evening dresses, cut in burgundy. A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Burgundy hides construction and shows lint. Plan a roller and a covered bag into the packing line.
Petite is a proportion change: the bust point, the waist and the knee line all move up, and the skirt sweep has to be rebalanced so it does not look cut short.
What Has To Be Specified
- Block: Mermaid bodice, fitted on a real model at the middle size before grading.
- Colour: Burgundy, with a lab dip approved against a physical swatch under both D65 and warm indoor light.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | crepe - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Mermaid |
| Bodice | soft bodice, light boning |
| Colourway | Burgundy |
| Lining | fully lined, bagged hem |
| Closure | invisible centre-back zip |
| Size run | XS-2XL plus a curve block |
| Sample lead time | 10-14 days on stock cloth |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
A mermaid silhouette is fitted from the bust to just below the knee and flares from there. The knee break is the whole fitting: 3 cm either way and the dress either walks or it does not.
Grading is where the money disappears: every detail placed by eye on the sample has to be measured on the pattern, or the size run drifts.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Pressing decides the finish. Satin and taffeta take a needle mark in a second, and no amount of QC takes it out afterwards.
Options We Can Build To
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.