Organza Bodycon Arabic Evening Dresses - Wholesale
فساتين سهرة ضيقة اورجانزا translates roughly to "organza evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are organza evening dresses. Organza is stiff and translucent, usually layered over a lining rather than worn alone. It marks if a pin stays in one spot overnight. A bodycon evening dress has negative ease, so the shell's stretch and recovery decide the fit more than the pattern does. Any seam that carries load needs a stretch stitch.
What Has To Be Specified
- Shell: Organza, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: Bodycon bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Organza - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | Bodycon |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt lined |
| Closure | invisible centre-back zip |
| Size run | 34-48 with a Gulf grade |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
Organza is stiff and translucent, usually layered over a lining rather than worn alone. It marks if a pin stays in one spot overnight.
A bodycon evening dress has negative ease, so the shell's stretch and recovery decide the fit more than the pattern does. Any seam that carries load needs a stretch stitch.
Two rolls of the same colour name will not match. Buy one lot, keep a roll reference with the order, and cut the whole run from it.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
The hem is where a cheap build shows. A 3 cm hem with a clean catch-stitch reads expensive; a 1 cm overlocked hem reads fast fashion.
Options We Can Build To
- Beading: hand-applied, machine-guided, or replaced with embroidery at a lower density and a lower price.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.