Catalogue of Brocade A-Line Turkish Arabic Evening Dresses
كتالوج فساتين سهرة تركية بروكار كلوش translates roughly to "catalogue brocade turkish evening dress". In production terms it is a set of decisions rather than a single garment, which is exactly why it is worth specifying properly before the sample is cut.
In production these are brocade evening dresses in the turkish direction. Brocade carries its pattern in the weave, so the motif repeat - not a print repeat - has to be planned across the bodice and the skirt panels. An A-line evening dress clears the hip and falls from the bust or the waist. It is the most forgiving block in the range and the easiest to grade from a 2XL up to a 5XL.
Turkish evening wear is a fitted bodice with a very full skirt, usually in tulle or taffeta, and it is the reference most often sent to us with a photo of a bridal salon window.
What Has To Be Specified
- Shell: Brocade, hand and weight approved on a physical swatch - imported evening cloth rarely matches a screen.
- Block: A-Line bodice, fitted on a real model at the middle size before grading.
- Colour: name the exact tone and send a swatch. In this category a photo is not a colour reference.
- Bodice structure: say whether the bodice is boned, fused, or soft. This single line decides the fit, the price and the packing.
- Lining: state bodice lining, skirt lining and whether the skirt is bagged out at the hem.
- Closure: name the type and position - invisible zip, lace-up back, or covered button placket.
- Sizing: give the size run, the grade rule and the fit model. A Gulf 2XL is not a European 2XL.
- Care: dry-clean-only is normal here; if the trim cannot survive solvent, say so before the label is printed.
Suggested Starting Specification
| Shell fabric | Brocade - swatch-approved, one dye lot for bulk |
| Length | as per your spec sheet |
| Silhouette | A-Line |
| Bodice | soft bodice, light boning |
| Colourway | buyer's colourway, lab-dipped |
| Lining | bodice lined, skirt unlined |
| Closure | invisible centre-back zip |
| Size run | S-XL (4 sizes) for the test |
| Sample lead time | 15-20 days for beaded panels |
| MOQ | 300 pcs per style for custom beading |
Where This Style Goes Wrong In Production
Brocade carries its pattern in the weave, so the motif repeat - not a print repeat - has to be planned across the bodice and the skirt panels.
An A-line evening dress clears the hip and falls from the bust or the waist. It is the most forgiving block in the range and the easiest to grade from a 2XL up to a 5XL.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
The first sample passes on the form and fails on a body: the waist sits high, the armhole cuts, or the sweep is 4 cm short. Fit on a real model before approving anything.
Beading is quoted per panel and bought per gram. A 15% allowance sounds generous until the third size run lands.
Options We Can Build To
- Sizing: a four-size test run, a standard eight-size run, or a graded run to your own spec sheet.
- Shell swap: the same block in a lighter or heavier version of the base cloth, priced separately.
- Closure: invisible zip, exposed zip, corset lace-up or button placket, each with its own sample requirement.
- Lining: unlined bodice with a lined skirt, half-lined, or fully lined - the last one changes the hand and the cost together.
Pre-production sample approval, in-line inspection during cutting, beading and sewing, and a final AQL inspection before packing, with measurement reports and photos shared before shipment.
If you are developing this style, send us a tech pack, a photo or a reference garment and we will quote within 24 hours. Contact bafinasa@bafinasa.com or WhatsApp +86 13827222469.